[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Re: DXF drawing




Could you email me your IDF file?

Thanks!

Dru




                      beyangj
                      <beyangj@xxxxxxxxxx      To: EnergyPlus_Support@xxxxxxxxxxxxxxx
                      m>                       cc:
                                               Subject:  [EnergyPlus_Support] Re: DXF  drawing
                      09/18/2004 10:35 AM
                      Please respond to
                      EnergyPlus_Support
                                                |--------------------------|
                                                | ( ) Federal Record       |
                                                | (*) Not a Federal Record |
                                                |--------------------------|





                                     User Filed as: Not Categorized in ERMS

        ------------------------------------------------------------------------------------|
       |                                                                                    |
       | If this external e-mail is a record and you are the first EERE recipient, click the|
       |           'File to ERMS' button in the toolbar to categorize this e-mail           |
        ------------------------------------------------------------------------------------|








Dear,
Thanks a lot for your help. In my model,the building is a 40-sotry
building, each story is same. I use the multiplier and set the
stories from the 1st floor to 39th floor as one floor, and the 40th
foolr as one floor individually. Should it be shown as two story in
the DXF file? But it only shows one floor in my DXF file. Could you
explain it?

Best,

Stewart

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Drury.Crawley@e... wrote:
>
> As Linda says, the DXF is three-dimensional.  In Voloview, the
default
> opens with
> a view of the top of the building.  You have several ways to get 3-
D views:
>
> A view similar to the image on page 133 of the IORef can be
selected
> from the menu: View, Orbit. (or click on the Globe with the arrow
on the
> right below the menu... when you move your mouse over it, it
says 'Orbit'.)
> Then move the image with your mouse.
>
> The other way to get wireframe three-D views is with the View,
Named Views
> option from the menu.  A good one to start with is Southwest
Isometric.
> (Hint,
> then click on the Globe with the arrow icon to get shaded
surfaces.)
>
>
>
>

>
beyangj

>                       <beyangj@h...      To:
EnergyPlus_Support@xxxxxxxxxxxxxxx
>                       m>
cc:
>                                                Subject:
[EnergyPlus_Support] DXF  drawing
>                       09/15/2004 10:41
AM

>                       Please respond
to

>
EnergyPlus_Support

>                                                 |------------------
--------|
>                                                 | ( ) Federal
Record       |
>                                                 | (*) Not a
Federal Record |
>                                                 |------------------
--------|
>

>

>
>
>
>                                      User Filed as: Not
Categorized in ERMS
>
>         -----------------------------------------------------------
-------------------------|
>
|
                |
>        | If this external e-mail is a record and you are the first
EERE recipient, click the|
>        |           'File to ERMS' button in the toolbar to
categorize this e-mail           |
>         -----------------------------------------------------------
-------------------------|
>
>
>
>
>
>
>
>
> Dear,
>
> A eplusout.dxf file is produced after running the simulation, but
> the drawing is a  floor plan. I want to get a three dimensional
> drawing like Figure 20 in the p133 on Input Output Reference.pdf,
> how can I get it?
>
> Thanks in advance!
>
> Stewart
>
>
>
> The primary EnergyPlus web site is found at:
> http://www.energyplus.gov
>
> The group web site is:
> http://groups.yahoo.com/group/EnergyPlus_Support/
>
> Attachments are not allowed -- please post any files to the
appropriate
> folder in the Files area of the Support Web Site.
>
>
>
>                     Yahoo! Groups Sponsor
>
>
>
>                         ADVERTISEMENT
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>       To visit your group on the web, go to:
>       http://groups.yahoo.com/group/EnergyPlus_Support/
>
>       To unsubscribe from this group, send an email to:
>       EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
>
>       Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate
folder in the Files area of the Support Web Site.



                    Yahoo! Groups Sponsor



                        ADVERTISEMENT








Yahoo! Groups Links
      To visit your group on the web, go to:
      http://groups.yahoo.com/group/EnergyPlus_Support/

      To unsubscribe from this group, send an email to:
      EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

      Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.







------------------------ Yahoo! Groups Sponsor --------------------~-->
Make a clean sweep of pop-up ads. Yahoo! Companion Toolbar.
Now with Pop-Up Blocker. Get it for free!
http://us.click.yahoo.com/L5YrjA/eSIIAA/yQLSAA/dkFolB/TM
--------------------------------------------------------------------~->

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/