Re: [EnergyPlus_Support] Re: Calculating Cooling Loads?

[Linda Lawrie <linda@xxxxxxxxxx>]

If you are using the 1ZoneUncontrolled.idf as your example, the 
constructions in that are all "R" and the message you are getting may be 
indicative of no thermal mass (such as "just" R walls would give you).

At 01:28 PM 9/28/2004, s_halbot wrote:
>infiltration. Just wondering if you may know what it is that is
>causing the error
>** Severe  ** Temperature out of bounds (223.80) for surface=ROOF
> >    **   ~~~   ** occuring in simulation=ST JOHN'S NF CAN WYEC2-B-
> > 14521 WMO#=718010 at 01/01 00:45.
>I've checked and rechecked the materials properties as the error
>script suggested, and they appear fine.  Any further suggestions
>would be appreciated.

Linda

EnergyPlus WebSite: http://www.energyplus.gov
Owner: EnergyPlus_Support list
Member: EnergyPlus Development Team



[Non-text portions of this message have been removed]



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Make a clean sweep of pop-up ads. Yahoo! Companion Toolbar.
Now with Pop-Up Blocker. Get it for free!
http://us.click.yahoo.com/L5YrjA/eSIIAA/yQLSAA/dkFolB/TM
--------------------------------------------------------------------~-> 

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/