[EnergyPlus_Support] cooling coil control

["hjunmoon" <gt6102a@xxxxxxxxxxxxxxxx>]

Dear all,

I am doing a sensitivity analysis with humidity control. To do this, 
I have to set an appropriate ranges of the parameters related to the 
control of heating/cooling coils.
3 parameters are in question:
1) Leaving relative humidity from cooling coil
2) Heating coil: Controller convergence tolerance
3) Cooling coil: Controller convergence tolerance

Can anyone give references which give typical ranges of these 
parameters? Any papers, manuals, websites, reports related to these 
parameters are welcome. I would like to work on as many as 
references I can get. Thanks in advance.

Best Regards,

HJ Moon
Georgia Institute of Technology
gt6102a@xxxxxxxxxxxxxxx




------------------------ Yahoo! Groups Sponsor --------------------~--> 
$9.95 domain names from Yahoo!. Register anything.
http://us.click.yahoo.com/J8kdrA/y20IAA/yQLSAA/dkFolB/TM
--------------------------------------------------------------------~-> 

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/