[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] HVAC Link Diagram and Mass flow rate calculation


Hi,
 
Problem: 
1. The HVAC link graph only show the FCUs for LG4, but I don't why the other zones can not display.
 
2. {
  ** Warning ** Error -- Mass Flow Rate Calculation in Plant Loop=CHILLED WATER LOOP SYS_2, Outlet and Inlet differ by more than tolerance.
   **   ~~~   ** Loop inlet node=CW SUPPLY INLET NODE 2, flowrate=0.000000000000000E+000
   **   ~~~   ** Loop outlet node=CW SUPPLY OUTLET NODE 2, flowrate=2.38898710063452
}
 
Please help me.
 
Thanks,
 
SAMLEE
 
Encl.


借過、一拍兩散、奇洛李維斯回信...
全港最大手機下載中心
http://mobile.yahoo.com.hk/


[Non-text portions of this message have been removed]



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Make a clean sweep of pop-up ads. Yahoo! Companion Toolbar.
Now with Pop-Up Blocker. Get it for free!
http://us.click.yahoo.com/L5YrjA/eSIIAA/yQLSAA/dkFolB/TM
--------------------------------------------------------------------~-> 

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/