[EnergyPlus_Support] COMIS/cracks/infiltration...

["alexandrevarela2000" <amv@xxxxxxxxxxxxxxxxxxxxx>]

Dear all,

I´m using COMIS, but I would like to set a constant infiltration rate 
for one of the zones (roof). When using the simplified model I would 
just use infiltration/ventilation, but when using COMIS this option 
is no longer availiable. Is there something I can do to set this 
constant rate?

Regarding the crack air flow equation. Is there any data availiable 
regarding crack behaviour? Somthing indicating air mass flow 
coefficient and air flow exponent for "typical" cracks.

Thank you all for your kind help,
Alexandre





------------------------ Yahoo! Groups Sponsor --------------------~--> 
$9.95 domain names from Yahoo!. Register anything.
http://us.click.yahoo.com/J8kdrA/y20IAA/yQLSAA/dkFolB/TM
--------------------------------------------------------------------~-> 

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/