Re: [EnergyPlus_Support] COMIS/cracks/infiltration...

["Joe Huang" <yjhuang@xxxxxxx>]

The COMIS program is able to accept a defined air flow at any node as "Test
Data".  However, this feature has not been implemented in the
EnergyPlus/COMIS link.  I will look into the code next week and attempt to
add that feature to the EnergyPlus link.

Joe Huang

----- Original Message ----- 
From: "alexandrevarela2000" <amv@xxxxxxxxxxxxxxxxxxxxx>
To: <EnergyPlus_Support@xxxxxxxxxxxxxxx>
Sent: Wednesday, November 03, 2004 3:25 AM
Subject: [EnergyPlus_Support] COMIS/cracks/infiltration...




Dear all,

I´m using COMIS, but I would like to set a constant infiltration rate
for one of the zones (roof). When using the simplified model I would
just use infiltration/ventilation, but when using COMIS this option
is no longer availiable. Is there something I can do to set this
constant rate?

Regarding the crack air flow equation. Is there any data availiable
regarding crack behaviour? Somthing indicating air mass flow
coefficient and air flow exponent for "typical" cracks.

Thank you all for your kind help,
Alexandre






The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate
folder in the Files area of the Support Web Site.

Yahoo! Groups Links









------------------------ Yahoo! Groups Sponsor --------------------~--> 
Make a clean sweep of pop-up ads. Yahoo! Companion Toolbar.
Now with Pop-Up Blocker. Get it for free!
http://us.click.yahoo.com/L5YrjA/eSIIAA/yQLSAA/dkFolB/TM
--------------------------------------------------------------------~-> 

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/