[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] COMIS simulation with Wind Pressure=zero




Hi,

I have just uploaded a file which we have simulated on version 1.2.0.
The model uses COMIS simulation.
In that version, the results seems to be ok.
But when we convert to and run with E+ version 1.2.1 , we got Wind Pressure
equals to zero. (!?)

Could anybody tell us what we are missing in the input file?
What could be happenning in this transition between 1.2.0 to 1.2.1 version?
(please, try to simulate the file in version 1.2.0 and then in the version
1.2.1...to see what hapens with wind pressure values...)

Thanks a lot!
Fernando Simon Westphal
UFSC - Brazil



------------------------ Yahoo! Groups Sponsor --------------------~--> 
$9.95 domain names from Yahoo!. Register anything.
http://us.click.yahoo.com/J8kdrA/y20IAA/yQLSAA/dkFolB/TM
--------------------------------------------------------------------~-> 

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/