[EnergyPlus_Support] comis : windows vertices

["ingdallolio" <ing.dallolio@xxxxxxxxx>]

Hi,
My walls upper rentilation openings on the est and west walls are 
parallel to the roof slope, if I keep the openings rectangular  COMIS 
do not like that I get an error message: 

AN ERROR IS REPORTED (Comis)  ventilation OUTPUT IS LIKELY TO BE WRONG
   *************
   ************* ===== Recurring Surface Error Summary =====
   ************* The following surface error messages occurred.
   *************
   ************* Base Surface does not surround subsurface errors 
occuring...
   ************* Check that the SurfaceGeometry object is expressing 
the proper starting corner and direction [CounterClockwise/Clockwise]

If I keep the lateral sides of the window vertical I get another 
error message like " window diagonal are not equal" 

If I use 3 vertices windows still COMIS complain but do not make 
reference to those openings I just get :
AN ERROR IS REPORTED (Comis)  ventilation OUTPUT IS LIKELY TO BE WRONG
Any idea ?
Thaks a lot for reading this.
Andrea.
   







------------------------ Yahoo! Groups Sponsor --------------------~--> 
Make a clean sweep of pop-up ads. Yahoo! Companion Toolbar.
Now with Pop-Up Blocker. Get it for free!
http://us.click.yahoo.com/L5YrjA/eSIIAA/yQLSAA/dkFolB/TM
--------------------------------------------------------------------~-> 

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/