[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Air velocity and internal walls.
Dear all:
I would like to know if it is possible to use walls inside a zone.
What I mean is a wall which is not dividing two zones but inside one
zone. Is this possible?
In Surface:HeatTransfer, when entering a surface one has to specify
InsideFaceEnvironment, and OutsideFaceEnvironment which can be the
exterior, another zone or a coefficient but not the same zone.
The other question is regarding air velocity. Is it possible to know
the mean air velocity in a zone when using COMIS?
So, here are my new year's eve questions. Thank you all for your
support in 2004 and may 2005 be even better than you expect it to be.
Alexandre Varela
------------------------ Yahoo! Groups Sponsor --------------------~-->
$4.98 domain names from Yahoo!. Register anything.
http://us.click.yahoo.com/Q7_YsB/neXJAA/yQLSAA/dkFolB/TM
--------------------------------------------------------------------~->
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/