[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] the temp of supply air is two high!
I want to simulate a 25-story building. i divide the building into
8 zones to simulate.There are 8 AHUs in this building. Each AHU
serves for one zone.
I set the temp of supply air to 16¡æ. But in the result of my
simulation, I find the temp of supply air in one zone is two high(21-
24¡æ), so the Mean Air Temperature in this zone is too high. The
other zones are OK. I have checked my idf file, but I can not find
the reason. Please help me! Thanks a lot!
i upload my idf file! If required, please check it!
(The problem lies in L_eastsouth zone, and the Air Primary Loop in
L_eastsouth zone is AHU_1401 Loop.)
The primary EnergyPlus web site is found at:
The group web site is:
Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to: