[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] About heating!



Dear all,
  
   I do a simulation for heating. when I move the HVAC system from 
the building, I find the zone/sys air temp is too high, sometime is 
30¡æ and above. In this case it do not require heating.
   I suspect that the internal loads caused this problem. I know 
When doing design simulaiton, I must set internal loads (lights, 
equipment, occupancy) to zero all day for heating. But when doing a 
weather file simulation, whether I also must set internal loads to 
zero all day for heating or not.
  Thank you very much!





The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/