[EnergyPlus_Support] Help!

["shirely213" <shirley213213@xxxxxxx>]

Dear all
   I simulate a building with an electric heating system¡ª¡ªRadiant 
Panel. I control the heating system by¡°Radiative / Conventive 
Units¡± and ¡°Zone Controls and Thermostats¡±.But the simulated 
result of the building¡¯s energy consumption is ¡°Zero¡± all the 
time .
   In the ERR file, it says: 
The following lines are "Orphan Objects".  These objects are in the 
idf file but are never obtained by the simulation and therefore are 
NOT used.
**   ~~~   **  See InputOutputReference document for more details.
************* Object=CONTROLLER LIST=RADIANT PANEL  CONTROLLER
************* Object=LOW TEMP RADIANT SYSTEM:ELECTRIC=RADIANTPANEL
   Looking forward to your help!
Thanks a lot!






The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/