[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] A Warning about Simple Heating Coil


Hi, All:
 
I got 13 warnings like the following during my simulation of 12 zones with 3 VAV systems.  Each zone has reheat coil.
"Warning ** ControlCompOutput: Maximum iterations exceeded for COIL:WATER:SIMPLEHEATING".
 
Could somebody tell me what may be the reason for causing these warnings and how can get rid of these.  Actually, when I used 1 step/hour, I did not get these warnings, but when I changed to 4 steps/ hour in the simulation, these warnings appeared.
 
Thanks a lot for your help.
 
Regards,
 
Zhen
 

		
---------------------------------
Do you Yahoo!?
 Yahoo! Mail - Easier than ever with enhanced search. Learn more.

[Non-text portions of this message have been removed]



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/