[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Re: from ADT 3.3 to ENERGY PLUS

I have the same problem, roofs and slabs do not disappear after I 
convert my IFC files. I have to say that I managed to have very 
little or no support on this thing. That's probably due to the fact 
that more than one ( actually more than two ) software are involved. 
Still I concur that the issue is critical for the use of E+

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "mohammed samier" 
<mkhaylani@y...> wrote:
> hi
> i have a problem in converting from (dwg) file in ADT to (IDF) 
> in energy plus
> the problem is that roofs or slabs or ceilings cannot be found in 
> and i have made the right procedure of creating space boundry and 
> exporting to IFC file and convert it to IDF by IFCtoIDF programm
> can any one tell me what to do..coze i am depending on ADT to 
> my geometry modeling instead of e+ which is difficult.
> any suggestion will be wellcomed
> thanks alot
> bye
> mohammed s. khaylani

The primary EnergyPlus web site is found at:

The group web site is:

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to: