Re: [EnergyPlus_Support] about node temperatures

["Michael J. Witte" <mjwitte@xxxxxxxx>]

My guess is that there is something wrong with the pump inputs.  Is this a 
variable flow system with constant pump power?  Look at the pump inlet and 
outlet temperatures, flow rate and pump electric power consumption.  This my 
reveal the problem.

Mike


On 13 Jan 2005, at 16:09, zhen tian wrote:

> 
> 
> Hi everyone:
> 
> I am simulating a building with five zones serviced by a VAV system. I set up
> the heating plant (purchased heating) temperature as 93 degree C.  The
> simulation goes through well, but when I check the system node temperature, I
> found that the "HW SUPPLY OUTLET NODE:System Node Temp[C](Hourly)" the
> temperature sometimes are " 93, 93, 111.1, 1111.4, 93.2, 93.2, 3533.6...."
> 
> And even the "CW PUMP OUTLET NODE:System Node Temp[C](Hourly) " is like this: "
> 1369.2, 2723.5, 11.7, 10.8, 1783.1..."
> 
> when I run the simulation in a typical summer day.
> 
> Could somebody tell me what is the problem?
> 
> Regards,
> 
> Zhen
> 
> 
> 
> 
> ---------------------------------
> Do you Yahoo!?
>  Yahoo! Mail - now with 250MB free storage. Learn more.
> 
> [Non-text portions of this message have been removed]
> 
> 
> 
> The primary EnergyPlus web site is found at:
> http://www.energyplus.gov
> 
> The group web site is:
> http://groups.yahoo.com/group/EnergyPlus_Support/
> 
> Attachments are not allowed -- please post any files to the appropriate folder
> in the Files area of the Support Web Site.
> 
> Yahoo! Groups Links
> 
> 
> 
> 
> 
> 
> 
> 
> 



========================================================
Michael J. Witte, GARD Analytics, Inc.
EnergyPlus Testing and Support      
EnergyPlus-Support@xxxxxxxx




The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/