[EnergyPlus_Support] Uncertainty analysis

["Peter G. Loutzenhiser" <post@xxxxxxxxxxx>]

I have built a "wrap" for EnergyPlus in MatLab to implement a sensitivity and 
Monte Carlo analysis to estimate output error due to input paramater uncertainty
(boundary conditions, dimensions, thermophysical properties, etc.).  For the 
first part of our study, guarded zones were used for all surfaces of the test 
cell and so weather conditions were unimportant.  But in subsequent 
experiments, weather will be an important parameter that will need to be 
implemented into this wrap.  Is there anything similar to the "RunEP.bat" for 
the weather processing that can be executed in a command line of another 
program, or does the purchase of the source code also include the source code 
for the weather processor; in order to create a batch file? 

Thank you for your help.

Peter Loutzenhiser
PhD Candidate   
EMPA Material Science and Testing
Iowa State University







The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/