[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] using heat recovery with 100% outdoor air

Hi, all:
I encountered a problem for using the heat exchanger object.  First, I add a heat recovery unit to a VAV system. I use "proportional minimum outdoor air. It seems that the heat recovery unit works.
But when I change the VAV system to a constant air flow system, I found the the heat recovery never works.  In this constant air flow system, I use 100% outside air by seting " proportional minimum, with maximum and minimum outdoor air flow as the same". 
So could somebody tell me what is the problem or how to set up 100% outdoor air with heat recovery?
Thanks a lot.

Do you Yahoo!?
 Yahoo! Search presents - Jib Jab's 'Second Term'

[Non-text portions of this message have been removed]

The primary EnergyPlus web site is found at:

The group web site is:

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to: