[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Chiller:Electric:EIR problem


Hi,
 
Thanks for your valuable fit-curve example.
 
In my original idf file (MWGO 041228 test c```), the chiller:electric was used for simulation. 
While in idf file (MWGO 041228 test d1), the chiller:electric:eir was used that the data shown in meter file were greatly different as compare with previous one, especially in the period of 08:00 to 15:00. Why the data in this period is constant?
 
Regards,
 
SAMLEE


借過、一拍兩散、奇洛李維斯回信...
全港最大手機下載中心
http://mobile.yahoo.com.hk/


[Non-text portions of this message have been removed]



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/