Re: [EnergyPlus_Support] 3D model output

[Linda Lawrie <linda@xxxxxxxxxx>]

At 12:01 PM 3/4/2005, jms_dtz wrote:
>In looking at the 3d geometry with Voloview Express, if there are
>holes in the rendering does this mean that the surface geometry is
>wrong or backwards?  Some of the floors and ceilings are not showing
>up.

It more likely means that your surface has >4 sides and we can't render a 
solid "3dface" for that.  In V1.2.1, it will have a "thicker" line on that 
surface.


Linda

EnergyPlus WebSite: http://www.energyplus.gov
Owner: EnergyPlus_Support list
Member: EnergyPlus Development Team



[Non-text portions of this message have been removed]



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/