[EnergyPlus_Support] windows on sloped surfaces

[ogocer@xxxxxxxxxxxxxx]

Dear all,
i have tried to simulate a glazed pitched roof in the middle of a building.
But i have a problem.

Warning ** Base surface does not surround subsurface (CHKSBS), Overlap
Status=No-Overlap
   **   ~~~   ** Surface "TOP CENTER ROOF4" misses SubSurface "TOP CENTER
R:W1"
i am sure i gave correct coordinates.when i checked dxf file it seems
okey. but between roof and window there is very small difference although
i specified coordinate in 10 digits. as you can imagine in sloped surfaces
coordinates arenot in whole numbers.
according to the warninng i assume it is possible to form sloped surfaces.
As if warning would be different.
have can i solve that overlap problem?
thanks all
o.gocer


The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/