Re: [EnergyPlus_Support] Output of Heat Flux

["Michael J. Witte" <mjwitte@xxxxxxxx>]

There are extra report variables available by using the command "DIAGNOSTICS, 
DisplayAdvancedReportVariables;".  With this active, the rdd file will list 
several report variables of the type "Opaque Surface Inside Face Conduction".  
This variable is equal to QH*Area, where QH="current inside flux" if I 
understand correctly.  Currently the inside flux is the only reportable value.

Mike


On 1 Apr 2005, at 16:56, Donald Colliver wrote:

> 
> Greetings,
> 
> 
> 
> I'm wanting to output the heat flux for a HeatTransfer surface or Subsurface
> (e.g. a window) and can't seem to find flux variables in the rdd or eso files.
> Do you have suggestions on how this can be done? 
> 
> 
> 
> Thanks
> 
> 
> 
> Don Colliver
> 
> 
> 
> [Non-text portions of this message have been removed]
> 
> 
> 
> The primary EnergyPlus web site is found at:
> http://www.energyplus.gov
> 
> The group web site is:
> http://groups.yahoo.com/group/EnergyPlus_Support/
> 
> Attachments are not allowed -- please post any files to the appropriate folder
> in the Files area of the Support Web Site.
> 
> Yahoo! Groups Links
> 
> 
> 
> 
> 
> 
> 
> 
> 



========================================================
Michael J. Witte, GARD Analytics, Inc.
EnergyPlus Testing and Support      
EnergyPlus-Support@xxxxxxxx




The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/