[EnergyPlus_Support] About the bypass

["energypluser" <energypluser@xxxxxxxxxxxx>]

Dear Mike

      I find that the inlet mass flow rate of chiller is much bigger
than the summation of the fan coil units's outlet mass flow rate.
(results from the chiller simulation I mentioned in the "". So I want
to check the bypass mass flow rate to find whether the excess mass
flow
rate goes through it and returns to the chiller. But I can not find a
report variable for the output. Could you tell me what kind of report
variable is in charge of the bypass performances?
      Thank you in advance.


                                                             charlie





The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/