[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Using of Aspect Ratio field at the GeometryTransform object

Hi All,
 
I tried in my IDF file to change the shape of the building by changing the Aspect Ratio field, but an error always appear which abort the execution of the file (fatal error). These error massages are: 
 
   ** Warning ** Sum of area times inside solar abs for all surfaces is zero in Zone: ZONE NORTH
   ** Severe  ** View factors not complete. Probably bad surface descriptions in zone="ZONE NORTH".
   **   ~~~   ** Enforced reciprocity has tolerance (ideal is 0.0)=NaN
   **   ~~~   ** Enforced value is not within normal convergence tolerance (<.0001).
   ** Severe  ** View factors not complete. Probably bad surface descriptions in zone="ZONE WEST".
   **   ~~~   ** Enforced reciprocity has tolerance (ideal is 0.0)=NaN
   **   ~~~   ** Enforced value is not within normal convergence tolerance (<.0001).
   ** Severe  ** View factors not complete. Probably bad surface descriptions in zone="ZONE EAST".
   **   ~~~   ** Enforced reciprocity has tolerance (ideal is 0.0)=NaN
   **   ~~~   ** Enforced value is not within normal convergence tolerance (<.0001).
   ** Severe  ** View factors not complete. Probably bad surface descriptions in zone="ZONE SOUTH".
   **   ~~~   ** Enforced reciprocity has tolerance (ideal is 0.0)=NaN
   **   ~~~   ** Enforced value is not within normal convergence tolerance (<.0001).
   **  Fatal  ** Singular matrix in LUdecomposition, window calculations

 
Is there any way to rotate the building without using this object (GeometryTransform).
 
Ali

Send instant messages to your online friends http://uk.messenger.yahoo.com 

[Non-text portions of this message have been removed]



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/