[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] WaterToWater HeatPump

Dear,
  I'm now simulating a WaterToWater Heatpump system.There is a severe 
while running the Ep-Lanch:

** Severe  ** Inlet parameters for plant demand side splitter are not 
physically possible
   **   ~~~   ** Problem in input for plant demand side CHILLED WATER 
LOOP
   **   ~~~   ** The maximum flow out of the splitter is less than 
the minimum inlet flow
   **   ~~~   ** Flow rate inputs for the loop do not match flow 
requirements of the various branches/components
   **   ~~~   ** Check your flow rates and make sure that flow 
balances between the splitter inlet and outlets
   **  Fatal  ** EnergyPlus terminated due to reason stated above

  I've uploaded the .idf named WaterToWater HeatPump.

  Thanks in advance.
  PCH

  

  




The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/