[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Re: WaterToWater HeatPump



All,
I'm having the same error message from E+ 1.22 with my input file, 
the input file was mostly generated with E+ 1.21, I went back to 1.21 
and it runs, I succesfully transitioned my input file bui 1.22 still 
crash.
hbn_pch, what version are you running ?
Thank for your help.
Andrea.    
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "hbn_pch" <hbn_pch@y...> 
wrote:
> Dear,
>   I'm now simulating a WaterToWater Heatpump system.There is a 
severe 
> while running the Ep-Lanch:
> 
> ** Severe  ** Inlet parameters for plant demand side splitter are 
not 
> physically possible
>    **   ~~~   ** Problem in input for plant demand side CHILLED 
WATER 
> LOOP
>    **   ~~~   ** The maximum flow out of the splitter is less than 
> the minimum inlet flow
>    **   ~~~   ** Flow rate inputs for the loop do not match flow 
> requirements of the various branches/components
>    **   ~~~   ** Check your flow rates and make sure that flow 
> balances between the splitter inlet and outlets
>    **  Fatal  ** EnergyPlus terminated due to reason stated above
> 
>   I've uploaded the .idf named WaterToWater HeatPump.
> 
>   Thanks in advance.
>   PCH




The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/