Re: [EnergyPlus_Support] Question about DXF to IDF

[Drury.Crawley@xxxxxxxxxx]

Quite easy...  DesignBuilder automatically creates
the EnergyPlus input (IDF).  To look at it,
after you've done the simulation (or when you've
selected the simulation tab), go to the menu,
select Tools, Display Simulation Input Script.
It should automatically open EP-Launch.  By
default, DesignBuilder puts your file in
C:\Program Files\DesignBuilder\EnergyPlus\
and names it in.idf.



                                                                                                         
                      "Bing Dong"                                                                        
                      <allen_dongenergy@yahoo      To: EnergyPlus_Support@xxxxxxxxxxxxxxx                
                      .com.sg>                     cc:                                                   
                      Sent by:                     Subject:  [EnergyPlus_Support] Question about DXF to  
                      EnergyPlus_Support@yaho         IDF                                                
                      ogroups.com                                                                        
                                                                                                         
                                                                                                         
                      05/21/2005 09:53 AM                                                                
                      Please respond to                                                                  
                      EnergyPlus_Support                                                                 
                                                                                                         
                                                                                                         
                                                                                                         



Dear All,

I set up a mutiple story building with DesignBuilder (evaluation version)
and creat a DXF file. I do not know how to convert to IDF file that
EnergyPlus can read.

Anyone knows? thank you very much

Cheers,

Allen


Yahoo! Mobile
- Download the latest ringtones, games, and more!

[Non-text portions of this message have been removed]



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate
folder in the Files area of the Support Web Site.



Yahoo! Groups Links
      To visit your group on the web, go to:
      http://groups.yahoo.com/group/EnergyPlus_Support/

      To unsubscribe from this group, send an email to:
      EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

      Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.







The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/