Re:[EnergyPlus_Support] Re: WaterToWater HeatPump

["ing.dallolio@xxxxxxxxx" <ing.dallolio@xxxxxxxxx>]

Thanks a lot pch.
I'm going to look at essage 4494.
Andrea.
---------- Initial Header -----------

>From      : EnergyPlus_Support@xxxxxxxxxxxxxxx
To          : EnergyPlus_Support@xxxxxxxxxxxxxxx
Cc          : 
Date      : Thu, 19 May 2005 11:04:25 -0000
Subject : [EnergyPlus_Support] Re: WaterToWater HeatPump

> Dear Andrea,
>   i simulate at version 1.21 and i'v solved the problem with Sankar's 
> help.Message 4494 perhaps is availale for you.
> 
>   Good luck.
>   pch
> 
> 
> --- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "ingdallolio" 
> <ing.dallolio@l...> wrote:
> > All,
> > I'm having the same error message from E+ 1.22 with my input file, 
> > the input file was mostly generated with E+ 1.21, I went back to 
> 1.21 
> > and it runs, I succesfully transitioned my input file bui 1.22 
> still 
> > crash.
> > hbn_pch, what version are you running ?
> > Thank for your help.
> > Andrea.    
> > --- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "hbn_pch" <hbn_pch@y...> 
> > wrote:
> > > Dear,
> > >   I'm now simulating a WaterToWater Heatpump system.There is a 
> > severe 
> > > while running the Ep-Lanch:
> > > 
> > > ** Severe  ** Inlet parameters for plant demand side splitter are 
> > not 
> > > physically possible
> > >    **   ~~~   ** Problem in input for plant demand side CHILLED 
> > WATER 
> > > LOOP
> > >    **   ~~~   ** The maximum flow out of the splitter is less 
> than 
> > > the minimum inlet flow
> > >    **   ~~~   ** Flow rate inputs for the loop do not match flow 
> > > requirements of the various branches/components
> > >    **   ~~~   ** Check your flow rates and make sure that flow 
> > > balances between the splitter inlet and outlets
> > >    **  Fatal  ** EnergyPlus terminated due to reason stated above
> > > 
> > >   I've uploaded the .idf named WaterToWater HeatPump.
> > > 
> > >   Thanks in advance.
> > >   PCH
> 
> 
> 
> 
> The primary EnergyPlus web site is found at:
> http://www.energyplus.gov
> 
> The group web site is:
> http://groups.yahoo.com/group/EnergyPlus_Support/
> 
> Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
>  
> Yahoo! Groups Links
> 
> 
> 
>  
> 
> 
> 



____________________________________________________________
Navighi a 4 MEGA e i primi 3 mesi sono GRATIS. 
Scegli Libero Adsl Flat senza limiti su http://www.libero.it




The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/