Re: [EnergyPlus_Support] Output command for EnergyPlus Module.

["Michael J. Witte" <mjwitte@xxxxxxxx>]

Check the module developers guide.  You need to get the next available unit 
number.  The standard EnergyPlus batch files should not be deleteing any files 
other than the standard EnergyPlus outputs.  It would be easier to make real 
Report Variables for what you want.  See the Module Developers guide.

Mike

p.s.  This topic would be more approriate for the EnergyPlus_Developers group.

On 25 May 2005, at 16:51, altig1611 wrote:

> Hi,
> 
> I am trying to modify part of EnergyPlus module. I have been trying 
> to produce output from MoistureBalanceManager.f90 module. I am 
> interested in finding out values of a few of variables in that 
> module, for example; QStar(out,eq,ilay,surf). I used "open" command, 
> followed by "write" and then "close". I wanted EnergyPlus to create 
> a text file with the values written on it. I am able to compile, 
> build and execute Eplus.exe. But so far I can't produce that. I look 
> every where but I could not find it. My questions are:
> 1. Is this  a right way to do it? I read FORTRAN's manual and the 
> routine that I mentioned above should give me what I want. But it 
> didn't. 
> 2. I also used unit=7 which is the default value for printing 
> results. But it didn't work. It should, should not it?
> 3. Would it be possible that Eplus did create the text file but 
> erased it after it was done with a simulation? 
> 4. If so, where is that command located? I have tried to look for 
> such command but I didn't find it.
> 5.  If not, can you give me some ideas? 
> 
> I am going to post MoistureBalanceManager.f90 that has the command I 
> have used. I not sure if it would help but just to show you what I 
> have done. Thank you so much for any help you can give me.
> 
> 
> Albert Sitorus
> Portland State University
> Portland Oregon.     
> 
> 
> 
> 
> 
> The primary EnergyPlus web site is found at:
> http://www.energyplus.gov
> 
> The group web site is:
> http://groups.yahoo.com/group/EnergyPlus_Support/
> 
> Attachments are not allowed -- please post any files to the appropriate folder
> in the Files area of the Support Web Site.
> 
> Yahoo! Groups Links
> 
> 
> 
> 
> 
> 
> 
> 



========================================================
Michael J. Witte, GARD Analytics, Inc.
EnergyPlus Testing and Support      
EnergyPlus-Support@xxxxxxxx




The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/