[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] WindowShadingControl + Schedule + ONifHighZoneAirTemp

Hello,

 

 

I am running a simulation with a "WindowShadingControl" that should be
controlled by "Schedule" AND "OnIfHighZoneAirTemp".  

 

 

The problem is that the control is only responding to the
"OnIfHighZoneAirTemp" condition. Any suggestion about this?

 

 

 

WINDOWSHADINGCONTROL, CONTROL ON INCIDENT SOLAR, !- Name of Shading Control

   ExteriorShade, !- Shading Type

   sun guard con persiana exterior, !- Name of construction with shading
device

   OnIfHighZoneAirTemp, !- Shading Control Type

   Sombra Solo Verano, !- Schedule name

   23.8, !- Setpoint 

   YES, !- Shading Control Is Scheduled

   NO, !- Glare Control Is Active

   , !- Material Name of Shading Device

   , !- Type of Slat Angle Control for Blinds

   ; !- Slat Angle Schedule

 

 



[Non-text portions of this message have been removed]



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/