[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Re: Downloading Version 1.2.1
I'm experiencing the same error message.
Andrea.
.
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Drury.Crawley@e... wrote:
>
> You should uninstall v 1.2.2 and reinstall 1.2.1.
> Contact me directly if you didn't keep a copy
> of 1.2.1 and we'll arrange a place for you to
> download.
>
> But it sounds as if the problems were still in
> 1.2.1 just not noted by E+.
>
>
>
>
> "colotupper"
> <tupper@c...> To:
EnergyPlus_Support@xxxxxxxxxxxxxxx
> Sent by:
cc:
> EnergyPlus_Support@yaho Subject:
[EnergyPlus_Support] Downloading Version
> ogroups.com
1.2.1
>
>
> 05/27/2005 11:56
AM
> Please respond
to
>
EnergyPlus_Support
>
>
>
>
>
>
> Does anyonoe know if there's a way to reinstall Version 1.2.1 after
> installing V1.2.2?
>
> None of my files work with the new version, and I need to run them
to
> produce a report that's due at the end of next week.
>
> I ran the transition program and manually fixed many errors, but any
> files with Hot Water Loops generate the following error.
>
> ** Severe ** Inlet parameters for plant demand side splitter are
not
> physically possible **
> ** Problem in input for plant demand side HOT WATER LOOP **
> ** The maximum flow out of the splitter is less than the minimum
inlet
> flow **
> ** Flow rate inputs for the loop do not match flow requirements of
the
> various branches/components **
> ** Check your flow rates and make sure that flow balances between
the
> splitter inlet and outlets
>
> None of my flow rates are being autosize, and I have made sure all
the
> inlet flows equal the outlet flows. Has anyone else had this
problem
> with the new version? I read some other messages about this same
> error, but the folks were able to fix it using V1.2.1 - my files all
> ran fine with the older version, so if anyone knows where to get the
> old version, I would appreciate it!
>
>
>
>
> The primary EnergyPlus web site is found at:
> http://www.energyplus.gov
>
> The group web site is:
> http://groups.yahoo.com/group/EnergyPlus_Support/
>
> Attachments are not allowed -- please post any files to the
appropriate
> folder in the Files area of the Support Web Site.
>
>
>
> Yahoo! Groups Links
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/EnergyPlus_Support/
>
> To unsubscribe from this group, send an email to:
> EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/