[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] availability manager - surface temperature

Dear all.
I'd like to simulate a building with a low temperature hydronic 
radiant system. 
The actual system uses the surface temperature, the zone temperature, 
outside air temperature, and occupancy schedules to turn the system on 
or off.
This control scheme could be modelled with system availability 
managers except the dependency to the surface temperature.

How can the system availability managers be connected to a surface 
temperature?

Christian




The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/