[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Using and/or post processing the output variables from EnergyPlus

I have used GenOpt for the optimization of EnergyPlus. I know that 
in GenOpt you can optimize just the last written variables in the 
*.eso file. This means that if I want to have regular results I have 
to use the daily report in optimization.

My problem is, for example, what if I want to deal with indoor 
temperature at 1200. Or if I want to use in the optimization the 
maximal/minimal values of some parameters. Is there any possibility 
to recalculate the output results and then to use in the 

I do not know if I explained this properly. I just want to use the 
particular values of some parameters in the optimization.

Please, if you know how to deal with this and if the explanation is 
bigger send me that like some documentation file.

Thank you in advance and regards

Natasa M.Djuric

The primary EnergyPlus web site is found at:

The group web site is:

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to: