[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [EnergyPlus_Support] Using and/or post processing the output variables from EnergyPlus
You should also consider getting results from EnergyPlus's tabular reports. I use the html version of the ABUPS report for summary data, because there are html tags in it are useful for identifying results. I would try to use a TimeBins report to get an average indoor temperature at 1200. As you get more and more into using optimization, you are probably going to need to create a little postprocessing program to read E+ results and then output the value for your objective function.
-----Original Message-----
From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx]On Behalf Of natasamdj
Sent: Monday, June 13, 2005 5:47 AM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: [EnergyPlus_Support] Using and/or post processing the output variables from EnergyPlus
Dear,
I have used GenOpt for the optimization of EnergyPlus. I know that
in GenOpt you can optimize just the last written variables in the
*.eso file. This means that if I want to have regular results I have
to use the daily report in optimization.
My problem is, for example, what if I want to deal with indoor
temperature at 1200. Or if I want to use in the optimization the
maximal/minimal values of some parameters. Is there any possibility
to recalculate the output results and then to use in the
optimization?
I do not know if I explained this properly. I just want to use the
particular values of some parameters in the optimization.
Please, if you know how to deal with this and if the explanation is
bigger send me that like some documentation file.
Thank you in advance and regards
Natasa M.Djuric
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
_____
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
* To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx <mailto:EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
[Non-text portions of this message have been removed]
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/