Re: [EnergyPlus_Support] Domestic Hot Water (output node temp)

["Michael J. Witte" <mjwitte@xxxxxxxx>]

I see the problem here.  A bug report has been posted.

Mike


On 30 Jun 2005, at 11:33, Miguel Angel Pascual Buisan wrote:

> I have ran a simulation with a "Domestic Hot Water" object and I have notice
> that the output node TEMP is following the Fraction Flow Schedule values
> (instead of the Mains Temps schedule values).
> 
> 
> 
> Has anybody notice this? Thanks in advance,
> 
> 
> 
> Miguel Angel Pascual
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> [Non-text portions of this message have been removed]
> 
> 
> 
> The primary EnergyPlus web site is found at:
> http://www.energyplus.gov
> 
> The group web site is:
> http://groups.yahoo.com/group/EnergyPlus_Support/
> 
> Attachments are not allowed -- please post any files to the appropriate folder
> in the Files area of the Support Web Site.
> 
> Yahoo! Groups Links
> 
> 
> 
> 
> 
> 
> 
> 



========================================================
Michael J. Witte, GARD Analytics, Inc.
EnergyPlus Testing and Support      
EnergyPlus-Support@xxxxxxxx




The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/