[EnergyPlus_Support] U values for constructions

[agas@xxxxxxx]

I am using a minimal building model to calculate U values for different constructions for 
comparative purposes. The U value that the report gives for a floor consisting of a 
100mm concrete slab in ground contact is 17W/m2.K. Various books I have give figures 
of around 1W/m2.K. 

Any suggestions as to which is right, or where to go?

Is there way to define the report format that makes this information easy to extract?

thanks,

Agas.


The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/