[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Re: Air Loop Error

Hi Linda

I want to model a 2 pipe fan coil system in E+. So I used a cooling 
coil, a heating coil, a fan and a outside air mixer to set up my 
system. For the water side, the cooling coil and heating coil are 
linked in sequence. And in the air side, the outside mixer, fan, 
cooling coil and heating coil locate in series. Is it feasible to 
model this kind of system in E+? Could you please give me some ideas 
for modeling this system?
Thank you in advance


--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Linda Lawrie <linda@l...> 
> Perhaps you should take a look at one of the Fan Coil example 
> and use that as a "template" for inputting your model.
> Note -- you're talking about using FanCoils here, yet you have no 
> FanCoil objects in your input.
> Linda
> EnergyPlus WebSite: http://www.energyplus.gov
> Owner: EnergyPlus_Support list
> Member: EnergyPlus Development Team
> [Non-text portions of this message have been removed]

------------------------ Yahoo! Groups Sponsor --------------------~--> 
<font face=arial size=-1><a href="http://us.ard.yahoo.com/SIG=12hqad59j/M=362131.6882499.7825260.1510227/D=groups/S=1705007389:TM/Y=YAHOO/EXP=1123401962/A=2889191/R=0/SIG=10r90krvo/*http://www.thebeehive.org
">Get Bzzzy! (real tools to help you find a job) Welcome to the Sweet Life - brought to you by One Economy</a>.</font>

The primary EnergyPlus web site is found at:

The group web site is:

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to: