[EnergyPlus_Support] Glass elevator in a glass elevator shaft

["stfnlstnr" <S.Leistner@xxxxxx>]

Dear all,
for estimating the temperatures people have to stand in an elevator
who got stuck i wanted to make a simulation with e+. The elvevator
brings up people  from the street to an upstairs plattform. Elevator
and shaft both are glass. The shaft has an height of about 15m and is
sun radiated from three sides. Calculating the temperature for the
shaft without cabin  works perfectly. But calculating the temperature
for the inner zone cabin doesn't work. E+ refuses to accept interior
sun exposed surfaces. Is a modelling possible, which gets the radiant
energy caught by the cabin? The air beetween cabin and shaft shall
possibly provide cooling.

Best regards

Stefan

 




------------------------ Yahoo! Groups Sponsor --------------------~--> 
Fair play? Video games influencing politics. Click and talk back!
http://us.click.yahoo.com/T8sf5C/tzNLAA/TtwFAA/dkFolB/TM
--------------------------------------------------------------------~-> 

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/