[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Curvature in EnergyPlus geometry

I'm wanting to simulating a tall building which has a large amount of curvature in its facades....and i was wondering if this is possible to do, whether it's accurate if it can be done and whether there are any other case studies that anyone else has done with this sort of geometry?
Thanks heaps for your help and time.

Morgan Ellis 
Project Engineer
Vipac Engineers & Scientists Ltd
2 Sirius Road 
Lane Cove, NSW 2066
Phone: +61 2 9422 4222
Fax: +61 2 9420 5911
Email: morgane@xxxxxxxxxxxx
Web: http://www.vipac.com.au

Please note the content of this message is commercial in confidence and if you are not the intended recipient, then please delete the message from your system and send a reply back to the sender. 

VIPAC is not liable for any loss, damage, claims, cost demand and expense whatsoever and howsoever arising in connection with or out of the use of data supplied in this e-mail transmission.  Whilst virus scanning software is utilised by VIPAC, no responsibility is taken for any virus damage that may originate from this transmission and the receiver is urged to scan this transmission and  any attachments for computer virus.

[Non-text portions of this message have been removed]

------------------------ Yahoo! Groups Sponsor --------------------~--> 
Fair play? Video games influencing politics. Click and talk back!

The primary EnergyPlus web site is found at:

The group web site is:

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to: