[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] wet/dry cooling towers?
Dear all,
I'd like to simulate a building where the air-conditioning system use
wet/dry cooling towers. If the ambient temperature is below 6°C the
nonevaporative air-cooled heat exchanger portion handle the entire
heat load (similar to the cooling tower as described in ASHRAE,
Systems and Equipment p36.5, fig 13). I haven't found any according E+
object.
Is there an object for modeling a wet/dry cooling tower?
In my case the wet and dry part of the tower did never work at same
time, therefore it is possible to split the tower in 2 components:
-) a standard cooling tower (wet)
-) air-cooled heat exchanger (dry)
which use the same fan.
But now the next question araise: How can I model a dry cooling tower?
Christian
------------------------ Yahoo! Groups Sponsor --------------------~-->
Get Bzzzy! (real tools to help you find a job). Welcome to the Sweet Life.
http://us.click.yahoo.com/A77XvD/vlQLAA/TtwFAA/dkFolB/TM
--------------------------------------------------------------------~->
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.idf and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/