[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [EnergyPlus_Support] Digest Number 1155
Two questions:
1. In Energy Plus, it is possible to have two zones stacked (two floors)
with openings/vents between them. Since Energy Plus doesn't do CFD, how is
the air exchange handled between zones?
2. Is it possible to divide a single slab into a mesh to measure the
temperature gradient across a slab? (e.g. due to uneven solar radiation on
the slab)
Thanks,
Troy
-----Original Message-----
From: EnergyPlus_Support@xxxxxxxxxxxxxxx
[mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx]
Sent: Tuesday, January 10, 2006 3:13 AM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: [EnergyPlus_Support] Digest Number 1155
There are 9 messages in this issue.
Topics in this digest:
1. DOE2 equivalent of reports
From: Mike Moon <m_moon70@xxxxxxxxxxx>
2. Re: DOE2 equivalent of reports
From: Drury.Crawley@xxxxxxxxxx
3. windows issues
From: "jf_autissier" <jf_autissier@xxxxxxxx>
4. Re: Daylighting detailed
From: "Michael J. Witte" <mjwitte@xxxxxxxx>
5. Re: where to find version 1.2.2 030 installation files and
password?
From: "Michael J. Witte" <mjwitte@xxxxxxxx>
6. Re: windows issues
From: "Michael J. Witte" <mjwitte@xxxxxxxx>
7. RE: Re: Solar Array with Boiler for DHW
From: "Ellis, Peter" <peter_ellis@xxxxxxxx>
8. Re: windows issues
From: Linda Lawrie <linda@xxxxxxxxxx>
9. Re: Full Fresh Air system with heat recovery and NO heating or
cooling coils in loop
From: "Elmer Morrissey" <elmofuddly@xxxxxxxxx>
________________________________________________________________________
________________________________________________________________________
Message: 1
Date: Mon, 9 Jan 2006 14:40:09 +0000 (GMT)
From: Mike Moon <m_moon70@xxxxxxxxxxx>
Subject: DOE2 equivalent of reports
Hi,
I guess this question is for the users who used DOE2
as well. What would be the equivalent report variables
in E+ for SS-D (HVAC Loads - system size) and BEPS
(Electricity and Gas consumption) reports of DOE2?
Thanks
Mike
___________________________________________________________
Yahoo! Photos ? NEW, now offering a quality print service from just 8p a
photo http://uk.photos.yahoo.com
________________________________________________________________________
________________________________________________________________________
Message: 2
Date: Mon, 9 Jan 2006 09:48:08 -0500
From: Drury.Crawley@xxxxxxxxxx
Subject: Re: DOE2 equivalent of reports
For EnergyPlus, you need to request a 'ABUPS' report
to get the equivalent of BEPS. The equipment sizing is
in the .EIO file (ie <yourinputfilename>.EIO). The .EIO
including zone, system, airflow, fan, and equipment sizing,
showing which design day was used.
"Mike Moon"
<m_moon70@xxxxxxxxxxx> To:
EnergyPlus_Support@xxxxxxxxxxxxxxx
Sent by: cc:
EnergyPlus_Support@yaho Subject:
[EnergyPlus_Support] DOE2 equivalent of reports
ogroups.com
01/09/2006 09:40 AM
Please respond to
EnergyPlus_Support
Hi,
I guess this question is for the users who used DOE2
as well. What would be the equivalent report variables
in E+ for SS-D (HVAC Loads - system size) and BEPS
(Electricity and Gas consumption) reports of DOE2?
Thanks
Mike
___________________________________________________________
Yahoo! Photos ? NEW, now offering a quality print service from just 8p a
photo http://uk.photos.yahoo.com
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are not allowed -- please post any files to the appropriate
folder in the Files area of the Support Web Site.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.idf and press
the "search" button.
YAHOO! GROUPS LINKS
Visit your group "EnergyPlus_Support" on the web.
To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
________________________________________________________________________
________________________________________________________________________
Message: 3
Date: Mon, 09 Jan 2006 15:55:08 -0000
From: "jf_autissier" <jf_autissier@xxxxxxxx>
Subject: windows issues
Hi,
How can I change Glazing type for each window of a same wall individaly ?
Can I import windows data (from window 5 for exemple) ?
PS : Is it possible to donwload a file contening all messages posted ?
That's could be great to find in some answers already posted !
Thanks and regards,
---------------> JeFF
________________________________________________________________________
________________________________________________________________________
Message: 4
Date: Mon, 9 Jan 2006 09:45:08 -0600
From: "Michael J. Witte" <mjwitte@xxxxxxxx>
Subject: Re: Daylighting detailed
It sounds like a geometry problem. Are you using Relative or World
Coordinates? It sounds like some surfaces may be facing opposite of what
they
should be. Use "Report, Surfaces, Details;" to generate a list of all
surfaces
and subsurfaces which includes tilt and azimuth. This report is placed in
the
eio output file. Opening the file in Excel (using comma delimiters) makes
it
most easy to read. Check that all surfaces are facing in the desired
direction.
Note that the coordinates for daylighting reference points are all relative
to
the zone origin (regardless of the choice of relative or world coordinates
for
surfacess).
Mike
On 6 Jan 2006, at 17:23, Rejane Loura wrote:
> Hello,
> I'm doing simulations in EnergyPlus with the Daylighting: detailed. I've
chose
> a real room. It is a Lab in the research centre. The room has 7 windows:
4 in
> facade north and 3 in south. The area of the zone is 56 m². I've created
a
> illuminance map with 9 points and I´ve chose two reference points in the
zone.
> And I've been doing simulations with this points in different places but
in
> all of them I've found 6 equals values. And they are in the same places
in all
> simulations. And I've had another problem, the results is showing beam
> radiation into the room between 10 and 12 but, indeed, the room has beam
> radiation in the afternoon (12 until 17). I've checked all of the input
like
> latitude, north axis and everything is ok. So, I woudl like to know what
can
> cause these problems? Thank You Rejane
>
>
> ---------------------------------
> Yahoo! doce lar. Faça do Yahoo! sua homepage.
>
> [Non-text portions of this message have been removed]
>
>
>
> The primary EnergyPlus web site is found at:
> http://www.energyplus.gov
>
> The group web site is:
> http://groups.yahoo.com/group/EnergyPlus_Support/
>
> Attachments are not allowed -- please post any files to the appropriate
folder
> in the Files area of the Support Web Site.
>
> EnergyPlus Documentation is searchable. Open EPlusMainMenu.idf and press
the
> "search" button.
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
========================================================
Michael J. Witte, GARD Analytics, Inc.
EnergyPlus Testing and Support
EnergyPlus-Support@xxxxxxxx
________________________________________________________________________
________________________________________________________________________
Message: 5
Date: Mon, 9 Jan 2006 10:44:44 -0600
From: "Michael J. Witte" <mjwitte@xxxxxxxx>
Subject: Re: where to find version 1.2.2 030 installation files and
password?
Version 1.2.2 is no longer supported. Please go to www.energyplus.gov to
register and download version 1.2.3.031. There are significant new features
and bug fixes in version 1.2.3.
Mike
On 7 Jan 2006, at 20:28, annabanana1m wrote:
> Thanks a lot!
>
>
>
>
>
> The primary EnergyPlus web site is found at:
> http://www.energyplus.gov
>
> The group web site is:
> http://groups.yahoo.com/group/EnergyPlus_Support/
>
> Attachments are not allowed -- please post any files to the appropriate
folder
> in the Files area of the Support Web Site.
>
> EnergyPlus Documentation is searchable. Open EPlusMainMenu.idf and press
the
> "search" button.
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
========================================================
Michael J. Witte, GARD Analytics, Inc.
EnergyPlus Testing and Support
EnergyPlus-Support@xxxxxxxx
________________________________________________________________________
________________________________________________________________________
Message: 6
Date: Mon, 9 Jan 2006 11:02:34 -0600
From: "Michael J. Witte" <mjwitte@xxxxxxxx>
Subject: Re: windows issues
1. Describe more than one window subsurface on the wall. For each
subsurface,
specify a different Construction name.
2. Yes, see "CONSTRUCTION FROM WINDOW5 DATA FILE"
3. (PS) No, but if you log in to the group on groups.yahoo.com, you can
search
the message database there.
Mike
On 9 Jan 2006, at 15:55, jf_autissier wrote:
> Hi,
>
> How can I change Glazing type for each window of a same wall individaly ?
> Can I import windows data (from window 5 for exemple) ?
>
>
> PS : Is it possible to donwload a file contening all messages posted ?
> That's could be great to find in some answers already posted !
>
> Thanks and regards,
> ---------------> JeFF
>
>
>
>
>
> The primary EnergyPlus web site is found at:
> http://www.energyplus.gov
>
> The group web site is:
> http://groups.yahoo.com/group/EnergyPlus_Support/
>
> Attachments are not allowed -- please post any files to the appropriate
folder
> in the Files area of the Support Web Site.
>
> EnergyPlus Documentation is searchable. Open EPlusMainMenu.idf and press
the
> "search" button.
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
========================================================
Michael J. Witte, GARD Analytics, Inc.
EnergyPlus Testing and Support
EnergyPlus-Support@xxxxxxxx
________________________________________________________________________
________________________________________________________________________
Message: 7
Date: Mon, 9 Jan 2006 10:27:46 -0700
From: "Ellis, Peter" <peter_ellis@xxxxxxxx>
Subject: RE: Re: Solar Array with Boiler for DHW
Hello Elmer,
The WATER HEATER:STRATIFIED object does not exist yet. Sorry about the
mistake in the documentation. A similar way to "realize energy savings" can
be accomplished by using two WATER HEATER:MIXED objects where one serves as
the storage tank coupled to the solar collectors and the other acts as an
auxiliary heater to make up the remaining temperature difference if the
storage tank water is not hot enough. I think this is probably what you
want to do.
To make the WATER HEATER:MIXED function as a storage tank, i.e., do
nothing/no heating, simply set the heater capacity to zero.
P
-----Original Message-----
From: EnergyPlus_Support@xxxxxxxxxxxxxxx
[mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx]On Behalf Of Elmer Morrissey
Sent: Friday, January 06, 2006 9:03 AM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: [EnergyPlus_Support] Re: Solar Array with Boiler for DHW
I'm going to try and send this again as the 'Rish Text Editor (Beta)
made a mess of my last attempt...
I've been looking at that example...
On page 821 of the input/output reference document it says...
"In order to realize energy savings with a solar heating system, it
is necessary to use the
WATER HEATER:STRATIFIED object for thermal storage."
To which water heater is this referring to?
I'm trying to emulate a system that uses 6 solar collectors that
provide heating for DHW (similar to the example you highlighted).
The water is initially heated in a vessel @40oC. When the solar
collector does not provide enough heat to heat the water, extra
heating is provided from a separate boiler circuit which also
provides for other disparate systems. This water is then fed into
another water heater which heats the DHW to a final temp of 60oC.
Does anyone have any ideas how I might set up a similar system in
E+.
I would like some advice on how good/bad/awful my proposed is...
Approach (This is only possible if I can make the water heaters do
nothing and impose a control whereby the full load is picked up by
the water heater source. Is that possible?)
Solar Collector -> (temp pickup +) Heat Exchanger #1 -> Water
Heater #1 @40oC
Boiler -> splitter {
(split 1)|-> Heat Exchanger #1
(split 2)|-> Water Heater #2 @ 60oC -> DHW
* I would set the Heat Exchanger #1's efficiency to values
that make it similar to the efficiency of the water heater to boiler
circuit setup. This should emulate a twin source for the water
heater.
Does anyone have any thoughts?
Kind regards
-Elmer
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "Ellis, Peter"
<peter_ellis@n...> wrote:
>
>
> Hello Elmer,
>
> The example file "SolarCollectorFlatPlateWater.idf" illustrates a
solar hot water system with DHW load, solar collectors, and storage
tank (WATER HEATER:MIXED). You can connect a boiler, or another
auxiliary WATER HEATER:MIXED (perhaps configured as instantaneous
water heater), in series with the storage tank.
>
> P
>
>
> -----Original Message-----
> From: EnergyPlus_Support@xxxxxxxxxxxxxxx
[mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx]On Behalf Of Elmer
Morrissey
> Sent: Thursday, January 05, 2006 12:31 PM
> To: EnergyPlus_Support@xxxxxxxxxxxxxxx
> Subject: [EnergyPlus_Support] Solar Array with Boiler for DHW
>
>
> Hello all,
>
> I am attempting a simulation of the system that provides hot water
for
> a building.
>
> System:
> A solar array and a gas fired boiler combine to provide the DHW
load.
> The solar array provides as much as it can and the rest of the
load is
> picked up by the boiler. Can anyone suggest how I can emulate this
> kind of system or provide a similar example circuit? Is there some
> form of object in E+ which acts as a buffer vessel for HW and can
be
> heated using two disparate loops?
>
> Kind regards
>
> -Elmer
>
>
>
>
>
>
> The primary EnergyPlus web site is found at:
> http://www.energyplus.gov
>
> The group web site is:
> http://groups.yahoo.com/group/EnergyPlus_Support/
>
> Attachments are not allowed -- please post any files to the
appropriate folder in the Files area of the Support Web Site.
>
> EnergyPlus Documentation is searchable. Open EPlusMainMenu.idf
and press the "search" button.
>
>
>
>
> _____
>
> YAHOO! GROUPS LINKS
>
>
>
> * Visit your group " EnergyPlus_Support
< http://groups.yahoo.com/group/EnergyPlus_Support> " on the web.
>
>
> * To unsubscribe from this group, send an email to:
> EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<mailto:EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx?
subject=Unsubscribe>
>
>
> * Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service < http://docs.yahoo.com/info/terms/> .
>
>
> _____
>
>
>
>
> [Non-text portions of this message have been removed]
>
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are not allowed -- please post any files to the appropriate
folder in the Files area of the Support Web Site.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.idf and press
the "search" button.
SPONSORED LINKS
Backup
<http://groups.yahoo.com/gads?t=ms&k=Backup+software+program&w1=Backup+softw
are+program&w2=Wedding+program+software&w3=Medical+software+program&w4=Email
+software+program&w5=Cad+software+program&w6=Maintenance+program+software&c=
6&s=177&.sig=wiesG5bErnmyLAfH1YaEBA> software program Wedding
<http://groups.yahoo.com/gads?t=ms&k=Wedding+program+software&w1=Backup+soft
ware+program&w2=Wedding+program+software&w3=Medical+software+program&w4=Emai
l+software+program&w5=Cad+software+program&w6=Maintenance+program+software&c
=6&s=177&.sig=a3691KCyJMgKyyK1yaEJUQ> program software Medical
<http://groups.yahoo.com/gads?t=ms&k=Medical+software+program&w1=Backup+soft
ware+program&w2=Wedding+program+software&w3=Medical+software+program&w4=Emai
l+software+program&w5=Cad+software+program&w6=Maintenance+program+software&c
=6&s=177&.sig=6KrvphoEeb0UAbiCZ82eLg> software program
Email
<http://groups.yahoo.com/gads?t=ms&k=Email+software+program&w1=Backup+softwa
re+program&w2=Wedding+program+software&w3=Medical+software+program&w4=Email+
software+program&w5=Cad+software+program&w6=Maintenance+program+software&c=6
&s=177&.sig=5V0SIRhgRRLoQW4MJboHFQ> software program Cad
<http://groups.yahoo.com/gads?t=ms&k=Cad+software+program&w1=Backup+software
+program&w2=Wedding+program+software&w3=Medical+software+program&w4=Email+so
ftware+program&w5=Cad+software+program&w6=Maintenance+program+software&c=6&s
=177&.sig=9VcsxFpnKZRZeTi4v0P9DA> software program Maintenance
<http://groups.yahoo.com/gads?t=ms&k=Maintenance+program+software&w1=Backup+
software+program&w2=Wedding+program+software&w3=Medical+software+program&w4=
Email+software+program&w5=Cad+software+program&w6=Maintenance+program+softwa
re&c=6&s=177&.sig=9lEF37ntDj_TiE5f6qAmsg> program software
_____
YAHOO! GROUPS LINKS
* Visit your group " EnergyPlus_Support
<http://groups.yahoo.com/group/EnergyPlus_Support> " on the web.
* To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<mailto:EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .
_____
[Non-text portions of this message have been removed]
________________________________________________________________________
________________________________________________________________________
Message: 8
Date: Mon, 09 Jan 2006 09:33:39 -0700
From: Linda Lawrie <linda@xxxxxxxxxx>
Subject: Re: windows issues
At 08:55 AM 1/9/2006, jf_autissier wrote:
>How can I change Glazing type for each window of a same wall individaly ?
Just use different constructions for each window.
>Can I import windows data (from window 5 for exemple) ?
Yes. Search the documentation for "Window5" for more details on how
to do this.
>PS : Is it possible to donwload a file contening all messages posted ?
There actually is an "offline" facility that I use for storing all
the messages. (Also, Yahoo's search is not bad but takes a while to
get through all the messages). The offline reader that I use is
called "PG Offline" (http://www.personalgroupware.com/). I just
exported the database and it's 5MB compressed (which I can't upload
to yahoo groups but could send. The database is in Access format).
Linda
EnergyPlus WebSite: http://www.energyplus.gov
Owner: EnergyPlus_Support list
Member: EnergyPlus Development Team
[Non-text portions of this message have been removed]
________________________________________________________________________
________________________________________________________________________
Message: 9
Date: Mon, 09 Jan 2006 18:37:11 -0000
From: "Elmer Morrissey" <elmofuddly@xxxxxxxxx>
Subject: Re: Full Fresh Air system with heat recovery and NO heating or
cooling coils in loop
Hi Fred,
Thanks for that. I am using a heat exchanger air to air generic
which looks like the following...
HEAT EXCHANGER:AIR TO AIR:GENERIC,
AHU1 Enthalpy Wheel, !- Heat exchanger name
FanAndCoilAvailSched, !- Availability schedule name
0.24, !- Nominal supply air flow rate {m3/s}
0.76, !- Sensible effectiveness at 100%
airflow heating condition {dimensionless}
0.68, !- Latent effectiveness at 100% airflow
heating condition {dimensionless}
0.81, !- Sensible effectiveness at 75%
airflow heating condition {dimensionless}
0.73, !- Latent effectiveness at 75% airflow
heating condition {dimensionless}
0.76, !- Sensible effectiveness at 100%
airflow cooling condition {dimensionless}
0.68, !- Latent effectiveness at 100% airflow
cooling condition {dimensionless}
0.81, !- Sensible effectiveness at 75%
airflow cooling condition {dimensionless}
0.73, !- Latent effectiveness at 75% airflow
cooling condition {dimensionless}
AHU1 OA Inlet Node, !- Supply air inlet node name
AHU1 MB OA Inlet Node, !- Supply air outlet node name
AHU1 MB Relief Air Outlet Node, !- Exhaust air inlet node name
AHU1 Exhaust Node, !- Exhaust air outlet node name
200.0, !- Nominal electric power {W}
Yes, !- Supply air outlet temperature
control
Rotary, !- Heat exchanger type
None; !- Frost control type
As you can see, I set the 'Supply air outlet temperature control' to
YES in order to moderate the intensity of heat exchange between the
two streams. However, I would prefer to give priority to zone
temperature. Is there any way to doing this?
The reason I want to do this is because on the rare occasions in
Ireland when outdoor temp is above 21oC, then the inlet stream temps
will be above my heat recovery outlet temp setpoint. Unfortunately,
this seems to make the heat recovery unit think it should engage in
full heat recover which pushes outlet temperatures well over 50oC
Any help would be greatly appreciated or am I missing something here?
Kind regards
-Elmer
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, fred buhl <wfbuhl@l...>
wrote:
>
> Not sure what your system looks like. Your Controller:Outside Air
object
> looks
> fine. What you should note is that all all central air systems in
> EnergyPlus are loops.
> That is, they are configured for recirculated air even if there is
none.
> The air loop
> does not need heating or cooling coil or any kind of controller.
All it nees
> is at least 1 component. The Controller:Outside Air
> can not be assigned to the Air Primary Loop in the controller
list. It
> should be part
> of the Outside Air System, named in its controller list.
>
> Fred
>
> Elmer Morrissey wrote:
>
> >Hi Fred,
> >
> >I've set my OA controller to the following..
> >
> >CONTROLLER:OUTSIDE AIR,
> > AHU1 OA Controller, !- Name
> > NO ECONOMIZER, !- EconomizerChoice
> > NO RETURN AIR TEMP LIMIT,!- ReturnAirTempLimit
> > NO RETURN AIR ENTHALPY LIMIT, !- ReturnAirEnthalpyLimit
> > NO LOCKOUT, !- Lockout
> > PROPORTIONAL MINIMUM, !- MinimumLimit
> > AHU1 Supply Fan Inlet Node, !- Control_Node
> > AHU1 OA Inlet Node, !- Actuated_Node
> > 0.21, !- minimum outside air flow rate
{m3/s}
> > 0.21, !- maximum outside air flow rate
{m3/s}
> > 19, !- temperature limit {C}
> > 4, !- temperature lower limit {C}
> > 0, !- enthalpy limit {J/kg}
> > AHU1 MB Relief Air Outlet Node, !- Relief_Air_Outlet_Node
> > AHU1 Extract Fan Outlet Node; !- Return_Air_Node
> >
> >Do I need an econmizer for what I am proposing to do?
> >
> >What would be the correct course of action in order to remove my
> >error for the fatal error described below that seems to insist on
a
> >Controller:Simple even though I do not have a heating coil or a
> >cooling coil? Do I need to insert a fake cooling coil with dummy
> >controls?
> >
> >Kind regards
> >
> >-Elmer
> >
> >--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, fred buhl
<wfbuhl@l...>
> >wrote:
> >
> >
> >>You'll need to pretend that the system is a recirc system with
> >>
> >>
> >outside
> >
> >
> >>air - ie a normal
> >>VAV system. You will need to set the minimum OA to the total
flow
> >>
> >>
> >rate.
> >
> >
> >>The heat recovery
> >>unit will be in the OA system. Probably need to set MinimumLimit
> >>
> >>
> >to
> >
> >
> >>Proportional Minimum
> >>in the controller:outside air.
> >>
> >>Fred Buhl
> >>
> >>Elmer Morrissey wrote:
> >>
> >>
> >>
> >>>Hello all,
> >>>
> >>>Has anyone modelled a Single Duct VAV system that takes full
> >>>
> >>>
> >fresh
> >
> >
> >>>air which moderates all zonal loads through a heat recovery
unit
> >>>only?
> >>>
> >>>I received this fatal error...
> >>>
> >>> ** Fatal ** ManageControllers: Invalid controller=AHU1 OA
> >>>CONTROLLER. The only valid controller type for an Air Primary
> >>>
> >>>
> >Loop
> >
> >
> >>>is CONTROLLER:SIMPLE.
> >>> ************* Fatal error -- final processing. More error
> >>>messages may appear.
> >>>
> >>>I don't have a CONTROLLER:SIMPLE because my AHU does NOT
contain
> >>>
> >>>
> >a
> >
> >
> >>>cooling coil or a heating coil. The facility's system designers
> >>>expect the rotary wheel will moderate all sensible and latent
> >>>
> >>>
> >loads
> >
> >
> >>>in their entirety.
> >>>
> >>>Does anyone have any ideas how I could emulate such a system?
> >>>
> >>>Does anyone have an example file of a FULL fresh air system
with
> >>>
> >>>
> >NO
> >
> >
> >>>recirc air?
> >>>
> >>>Kind regards
> >>>
> >>>-Elmer
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>The primary EnergyPlus web site is found at:
> >>>http://www.energyplus.gov
> >>>
> >>>The group web site is:
> >>>http://groups.yahoo.com/group/EnergyPlus_Support/
> >>>
> >>>Attachments are not allowed -- please post any files to the
> >>>
> >>>
> >appropriate folder in the Files area of the Support Web Site.
> >
> >
> >>>EnergyPlus Documentation is searchable. Open EPlusMainMenu.idf
> >>>
> >>>
> >and press the "search" button.
> >
> >
> >>>Yahoo! Groups Links
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >
> >
> >
> >
> >
> >
> >
> >The primary EnergyPlus web site is found at:
> >http://www.energyplus.gov
> >
> >The group web site is:
> >http://groups.yahoo.com/group/EnergyPlus_Support/
> >
> >Attachments are not allowed -- please post any files to the
appropriate folder in the Files area of the Support Web Site.
> >
> >EnergyPlus Documentation is searchable. Open EPlusMainMenu.idf
and press the "search" button.
> >
> >Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
>
>
> [Non-text portions of this message have been removed]
>
________________________________________________________________________
________________________________________________________________________
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are not allowed -- please post any files to the appropriate
folder in the Files area of the Support Web Site.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.idf and press
the "search" button.
------------------------------------------------------------------------
Yahoo! Groups Links
------------------------------------------------------------------------
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.idf and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/