[EnergyPlus_Support] Controlling Air Flow rate through HVAC system

["zorba2pi" <barryaw@xxxxxxxxxxx>]

I am working on IEA Annex #46 at Oklahoma State and we are needing to
control the air flow rate through the HVAC system on a schedule.  I am
been trying to figure out a way of accomplishing this but so far the
only I have been able to find is a schedule to turn the system on and
off and a schedule for the minimum air flow rate.

I was able to modify the source code to allow the fan power to be
calculated off a schedule, but this "back door" approach will not work
for everything I need to accomplish?

I don't mind doing a simple modification to the source code, but I
can't even find where the system flow rate is determined to begin with.

Any Ideas?

Also, we are using Version 1.2.2 for this case

Thank you,
Barry Wilson






The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/