[EnergyPlus_Support] Re: Open Source Heatpump with preheat inlet water

["Elmer Morrissey" <elmofuddly@xxxxxxxxx>]

Can anyone help... this is still unresolved?

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "Elmer Morrissey" 
<elmofuddly@...> wrote:
>
> Hello all,
> 
> Is there any way to emulate an open source heat pump in E+?
> 
> The system takes water from a local aquifer. Some of this water is 
pre 
> heated with two heat exchangers ((1) a `dump' from a solar circuit 
> network and (2) a `dump' from a refrigeration circuit). Then this 
> water is fed into the heat pump which provides low temperature hot 
> water for heating the building.
> 
> I would appreciate any help. The exact objects don't have to be 
heat 
> pumps/heat exchangers... I just need to emulate performance.
> 
> Kind regards
> 
> -Elmer
>






The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/