[EnergyPlus_Support] single zone

[kir kumar <kirank209@xxxxxxxxxxx>]

Dear Linda,
  I have a question.
  If there are several(say 14) rooms and each room is equipped with one VAV box with reheat coil. Therefore there are 14 VAVboxes with their respective reheat coils. The supply air is splitted to each room carrying its own VAV box. The supply air is supplied by an air handling unit which is in a mechanical room. The HVAC system used is "single duct VAV with reheat". All rooms are maintained at 72 Farenhiet(set point temperature).
   
  I want to take advantage of the fact that the set point temperature of all rooms is same. A zone is defined as a volume having same set point temperature and hence I want to consider all those 14 rooms as one single zone.    I donno if I can describe 14 VAV boxes(with reheat coils) while defining my air loop in my input file.
   
             Now my question is, can I take any one room's VAV box with its reheat coil and magnify its dimensions to 14 times its original dimensions and use only one magnified VAV box with a reheat coil while defining my air loop in my input file. The advantage I think in this method is I need not describe all 14 vav boxes in airloop.
  kiran
   
   

Send instant messages to your online friends http://in.messenger.yahoo.com 

[Non-text portions of this message have been removed]



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/