[EnergyPlus_Support] EnergyPlus Window Vertice Entry

["J S" <jjs173@xxxxxxxxx>]

This question may have been answered in a past post but:

My coordinate entry for all my zones is setup for relative coordinates
so I can change building orientation.  When I enter the window
vertices, is the coordinates starting from the wall "0,0,0" point
(depending on direction), or the zone 0,0,0 point.

When I entered the vertices relative to the zone, all my windows, per
a rendering in DrawEZPlus, were consolated into a very small area near
the building origin.

I will be using the Eplus Daylighting engine, so I'm entering vertices
for each window.

which is the correct apprach?

John

Which approach is correct?






The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/