[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] coordinates of internal surface



Dear users of EnergyPlus,

I have a thermal zone with a internal wall. This wall (internal surface)
separates the zone in two rooms.How can I introduce coordinates of the 
vertex of the surface?Which side I have to look  from, the surface? 
I have introduced the coordinates of this surface two times (once 
looking from one room and once  from the other room ).I have defined 
this internal wall as adiabatic surface and I used itself as the 
outside environment.
Is this correct?

Best Regards,

Marion Davide.
 



   





The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/