Re: [EnergyPlus_Support] coordinates of internal surface

["Michael J. Witte" <mjwitte@xxxxxxxx>]

Yes, this will work.  A simpler approach would be to use internal mass which 
does not require coordinates.  The area of the internal mass would be set equal 
to the total exposed area of both sides of the internal wall.

Mike


On 1 Mar 2006 at 9:27, dademarino wrote:

> Dear users of EnergyPlus,
> 
> I have a thermal zone with a internal wall. This wall (internal surface)
> separates the zone in two rooms.How can I introduce coordinates of the 
> vertex of the surface?Which side I have to look  from, the surface? 
> I have introduced the coordinates of this surface two times (once 
> looking from one room and once  from the other room ).I have defined 
> this internal wall as adiabatic surface and I used itself as the 
> outside environment.
> Is this correct?
> 
> Best Regards,
> 
> Marion Davide.
>  
> 
> 
> 
>    
> 
> 
> 
> 
> 
> The primary EnergyPlus web site is found at:
> http://www.energyplus.gov
> 
> The group web site is:
> http://groups.yahoo.com/group/EnergyPlus_Support/
> 
> Attachments are not allowed -- please post any files to the appropriate folder
> in the Files area of the Support Web Site.
> 
> EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the
> "search" button.
>  
> Yahoo! Groups Links
> 
> 
> 
>  
> 
> 
> 
> 


========================================================
Michael J. Witte, GARD Analytics, Inc.
EnergyPlus Testing and Support      
EnergyPlus-Support@xxxxxxxx





The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/