[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Re: COMIS + restricting openings
I already found the answer on my second question on page 330 of the
manual. So bother for that question anymore!
greetings
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "sebastian.coene"
<sebasje27@...> wrote:
>
> Hi,
>
> I am making a building with natural ventilation through a COMIS
> simulation. It all works fine. But I don't want my windows to open
> with a OpeningsFactor greater then 0,35 (now the OF are always >0,7).
> Can I block them in a way with a max of 0,35?
>
> A second question is what wind speeds COMIS uses? I am making a hand
> calculation to check the results.
> Does COMIs work with a speed that gets higher the higher you get?
> (exponential curve like the ones described in "Numerical Air for Air
> infiltration by M. Orme )
>
> that's it... for now! :)
>
> Greetings Sebastian
>
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.idf and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/