[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] building orientation

I want to simulate a building with a long axis rotated for 349 degrees from
the north axis. I gave this value to the field 'North Axis' in 'Simulation
Parameters: Building'. If I open the .dxf, no rotation occured and I always
get the following warning:
** Warning ** World Coordinate System selected.  Any non-zero Building/Zone
North Axes or non-zero Zone Origins are ignored.
   **   ~~~   ** These will be used in Daylighting:Detailed calculations but
not in normal geometry inputs.

(The same warning appears for every rotation angle.)

Can someone help me?

Friedl


[Non-text portions of this message have been removed]



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/