[EnergyPlus_Support] Cooling load calculation E20 vs E++

["ashishkadam78" <ashishkadam78@xxxxxxxxxxx>]

Dear Friend,

Have you tried doing cooling load calculation on carrier E20 shhet or 
any other similar format (may include any conventional method). What 
is your impression about the accuracy of these methods, which are 
currently being followed by most of the consultants and companies??

What is percentage deviation in cooling or/and heating load oocurs 
when we use energy plus over these conventioal methods. Also, if you 
can give rough percentage reduction in installation capacity and 
operating cost then it will be more delighting.

Thanks,

Ashish Kadam






------------------------ Yahoo! Groups Sponsor --------------------~--> 
Home is just a click away.  Make Yahoo! your home page now.
http://us.click.yahoo.com/DHchtC/3FxNAA/yQLSAA/dkFolB/TM
--------------------------------------------------------------------~-> 

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/