[EnergyPlus_Support] SINGLE ZONE MAX HUMIDITY CONTROL

["aboyemeplus" <Merid.Aboye@xxxxxxxxxxxxxx>]

Hi all,

The message listed below is displayed when I use the "Max Humidity 
Control" option with the "Furnace:BlowThru:HeatCool" object. The goal 
of the controller is met (RH in Zone 2 does not exceed 50%) despite 
the node connection error!  I really would like to know the 
meaning/implications of the error. 
Thank you for your support.

Merid  


** Severe  ** Node Connection Error, Node="ZONE 2  ZONE AIR NODE", 
Sensor node did not find a matching node of appropriate type.
**   ~~~   ** Reference Object=SET POINT MANAGER:SINGLE ZONE MAX HUM, 
Name=ZONE2MAXRH






------------------------ Yahoo! Groups Sponsor --------------------~--> 
Everything you need is one click away.  Make Yahoo! your home page now.
http://us.click.yahoo.com/AHchtC/4FxNAA/yQLSAA/dkFolB/TM
--------------------------------------------------------------------~-> 

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/